asd
This is the Method statement for waterproofing coating to Potable Drinking water tank usingSikatop Seal 107 – a Sika’s product.
Scope of work
Applicable for Drinking water tank, waterproofing solution by coating and jointing.
Advantages of waterproofing using Sikatop Seal 107
Easy to apply by brush
Approved to be in contact with drinking water
No water required
Fast mixing
Very good adhesion
Product
Sikatop Seal 107 is cementious base, 2-component polymer modified waterproofing slurry. It applied to concrete and mortar to prevent water infiltration.
Steps of Application
1. Concrete, mortar surfaces must be clean, free from grease, oil and loosely adhering particles. If a rendering/levelling/slope making mortar is required, it shall be applied to the concrete with a bonding bridge (e.g. Sika Latex diluted 1:1 with water and mixed with cement) and it shall be cured properly.
2. Prior to Sikatop Seal 107 application, surfaces should be saturated thoroughly but no standing water.
3. Mixing Sikatop-Seal 107: Mix in a clean container by slowly adding the powder component to the liquid component and stir with slow speed electric mixer
4. Apply the first coat of Sikatop- Seal 107 by using brush or trowel. The rate of application 2 kg/m2/coat.
5. Following the curing of the first coat (after 4 h), apply the second coat using by trowel or brush.
6. Following the curing of the 2nd coat (after 24 h), fix the tile with suitable tile adhesive.
Consumption of Sikatop Seal 107
Dependent on the substrate roughness, surface profile and thickness of the layer applied, but as a guide, ~ 2.0 kg / m2 / mm (excluding allowances for loss wastage, surface profile and porosity, etc.).
Certificate
Test Reports and certificates available for Sikatop Seal 107.
Bonding strength to concrete by Authorized Labs.
Health safety by Pasteur Institute
Waterproofing ability
Technical Data sheet (TDS)
TDS of Sikatop Seal 107 in pdf format can be downloaded from Sika website.
Posted in: 
0 التعليقات:
Post a Comment